Please complete the form and we will send you our offer, including a description, images and technical data, within 1-2 days.

The "Boot and work shoe washer flush to the floor" can be installed at ground level or partially recessed. It has a stainless steel tray with a central drain and odour trap. The stainless steel grating contains side brushes, sole brushes and water spray nozzles made of stainless steel as well as a foot valve for water control. A retaining bracket with water stop valve and a system separator in accordance with DIN EN 1717 is also integrated. A water-bearing hand brush enables precise cleaning. The system is frequently used in the construction industry, horticulture, agriculture and by blue light organisations.

The "Boot and work shoe washer flush to the floor" impresses with the following features in professional use:

• Boot washer with double tub made entirely of stainless steel
• For boot cleaning (right) and work shoe cleaning (left)
• Including 2 BA system separators in accordance with DIN 1717 for maintaining water quality
• For deeper or flush installation in floors and ground depressions
• Shallow installation; 90 mm installation depth possible
• 2 side brushes (right) for precise cleaning of boots and work shoes at ankle height
• 2 x 12 easily replaceable sole brush mouldings
• Side-mounted stainless steel spray nozzles
• Automatic water control with the aid of a foot valve
• 2 automatic water stop valves incorporated in the grab rails
• 2 trays with a central floor drain, sludge collection bucket and odour trap made of stainless steel
• With stainless steel hand support bar for greater stability
• Supplied with 2 water-bearing hand brushes for precise, customised shoe and boot cleaning
• Water-bearing hand brush with 1.5 m long metal flex hose
• 3 stainless steel grids, the centre one can be removed
• Stainless steel stilt feet for easy installation
• Easy cleaning and maintenance
• No power requirement

With the 2 x 12 hard sole brushes at each washing station and the 2 softer side brushes on the right-hand side of the combi washer, work shoes and boots are cleaned quickly and powerfully. Soiled boots and shoes are placed on the practical stainless steel grids. After the signal, triggered by the foot valve, the stainless steel spray nozzles on the side spray the footwear all over with liquid. The friction of the boots and work shoes against the floor or side brushes effortlessly removes dirt from the surface and leaves the footwear sparkling clean. The 2 stainless steel grab rails invite you to hold on at the right height and secure each stand. There is a water-bearing hand washing brush with a flexible metal hose on the left-hand side of each tray and holder. The double washing system also includes 2 automatic water stop valves that can be easily operated with one hand. The "Boot and work shoe washer flush to the floor" also has two certified BA system separators in accordance with DIN 1717 to maintain the water quality.

A central drain under the central, removable stainless steel grating in the stainless steel tray with integrated sludge trap and odour trap enables smooth water drainage and protects against unpleasant odours from the drainage system. Like the 2 x 12 floor brushes of the boot washer, the centre grating can be easily removed and replaced. This makes maintenance and cleaning particularly easy. The water connection must comply with the regulations of the local waterworks and must be carried out by an authorised specialist company. A power connection is not required. If you are interested in a washing system exclusively for boots or shoes, we recommend our "Boot washer steel flush to the floor flat" or the "Shoe washer work shoes built-in version flat", which have been specially developed for cleaning boots or shoes.